skysticker silicon is a synthesis of a very lightweight fabric and a modified silicone adhesive. This unique combination has been specially developed for use on siliconised surfaces such as Zero Porosity Nylon (parachute), Dominicotex 10D (paraglider/kite).
Very light lettering for paragliders, parachutes, kites.
This material is suitable for siliconised surfaces (e.g. Zero Porosity, PN4, Dominicotex 10D, Dominicotex 20D PS...).
The initial adhesion of skysticker silicon is still low on siliconized substrates. This enables subsequent repositioning. When using a transfer film, the sticker should rest for approx. 10-15 minutes after it has been pressed on. Then remove the transfer film. The adhesive reaches the desired final adhesion within 24-36 hours.
27g/sqm ripstop fabric made of 100 % nylon.
40g/sqm (+-20%) modified silicone adhesive, colourless transparent, temperature range: -40 to +200 degrees Celsius (short-term up to 250 degrees Celsius).
The information on suitability reflects our experience. In any case, a suitability test must be carried out under the respective operating conditions. The information is not binding and does not constitute a guarantee. The weight information given relates to the ripstop fabric and does not include the adhesive.